X Close
BlogHeader.jpg

FireAngel Blog

Fire Safety Requirements for New Build Properties

Fire safety is one of the key sections within the Building Regulations, which outline the requirements needed to provide an early warning of fire, escape routes, preventing the spread of fire, and providing access to firefighting facilities for the Fire and Rescue Services. Across the UK there are different Fire Building Regulations which draw from different documents and require varying levels of protection. All of the regulations cover a wide range of safety fire safety requirements as detailed in this blog. New build sites face numerous challenges during the construction phase of build. This blog will discuss the  common challenges faced and how the FireAngel range offers a solution to the needs of all types of installations. 
Read More

How To Install Hardwire and Wireless Smoke Alarms in a Mixed System

Ways to interlink alarms FireAngel Wi-Safe 2 provides flexible wireless solutions for both hard-wired and battery systems. Up to 50 smoke, heat or carbon monoxide alarms can be interlinked in a network for maximum coverage. There are 3 main ways to interlink smoke alarms: Hardwired interlinked Interlinked via wireless radio-frequency (Wi-Safe 2 RF Interlink) Mixed systems - a hybrid system of hard-wired and Wi-Safe 2. This provides contractors with system flexibility. Additional smoke, heat, CO and specialised products such as strobes and pads and low frequency sounders for the deaf and hard of hearing can easily be wirelessly added or removed.
Read More

Scotland Updating Fire Safety Legislation following Grenfell Tragedy

Scotland has long since led the way with carbon monoxide and fire safety legislation in the UK. For example, Building Regulations in England and Wales currently stipulate a Category LD3 as a minimum for domestic new builds - whereby alarms are fitted  in all circulation spaces that form part of escape routes - but Scotland’s technical handbook 2017 stipulates a Category LD2. In an LD2 system, alarms are installed in all circulation spaces that form part of escape routes but also in all areas that are either high risk or the principal habitable room (such as kitchens and living rooms).
Read More

Alarm Control Unit - An Ideal Solution To Remotely Testing Smoke Alarms

What are the benefits of an alarm control unit?  The SONA by FireAngel Alarm Control Unit (WTSL-SN-1) allows you to remotely test a variety of smoke, carbon monoxide and heat alarms interlinked in the home. For the alarm control unit to integrate with a fire safety network, only one Wi-Safe 2 alarm is required. The control unit is therefore easily compatible with an established hardwired network!
Read More

Why FireAngel Is Moving Away From Ionisation Alarms

How do ionisation alarms work? Ionisation smoke alarms contain a tiny amount of a radioactive isotope. This emits alpha particles causing the ‘ionisation’ in the air within a smoke detector. Therefore, if smoke enters the detecting chamber, some of these ionised air molecules will react with the smoke, causing a change in electrical behaviour - hence triggering the alarm to go off.
Read More

Smoke Alarm Placement, Installation And Siting: Your Essential Guide

In the latest FireAngel guide, smoke alarm placement, installation and siting are all covered in a clear and detailed visual format.   Whilst primarily designed with electrical contractors in mind, this free guide will be relevant to a range of people in the fire safety industry - from installers, to specifiers, landlords to the Fire and Rescue Service.
Read More

Your Guide For Smoke Alarm Positioning To Meet Building Regulations

What are the Building Regulations?  Building Regulations are the minimum standards set for the design, construction and alterations to buildings. They are regularly changed and updated by Government, and are approved by Parliament. Fundamentally, the Building Regulations work to ensure the health and safety of those using the building, and help conserve on fuel and power. They cover all aspects of construction, including foundations, damp-proofing, the overall stability of the building, insulation, ventilation, heating, fire protection and means of escape in case of fire. They also ensure that adequate facilities for people with disabilities are provided in certain types of building.
Read More

Are Smoke Alarms Meant To Connect?

Different ways smoke alarms can connect Smoke alarms can interlink in a number of ways: they can be hardwired, wireless (e.g. connected via radio frequency) or part of a mixed system. The simplest and quickest way to connect/interlink alarms is via wireless radio-frequency as this requires no destructive hardwired cabling. Not only does this reduce installation time, but it allows up to 50 alarms to be easily installed (or uninstalled) into the same meshed network. Please see FireAngel’s “How to Learn In” blog post for a quick and simple tutorial on how to connect your smoke alarms.
Read More

How To 'Learn In' Smoke Alarms To Create An Enhanced Fire Safety Network

What is the 'Learn in' process to interlink alarms ? The process of 'learning in' is a simple and intelligent way of wirelessly interlinking up to 50 different Wi-Safe 2 fire safety devices in a property. Interlinking alarms is highly beneficial to residents as, when one alarm detects a problem, all the smoke/heat/ carbon monoxide (CO) alarms within the wireless network will sound. Not only with this alert occupants (regardless of where they are in the home) but for Wi-Safe 2 products, this will also exemplify the type of problem.
Read More

What Is FireAngel Multi-Sensor Technology?

What is Multi-Sensor technology? As technology advances, fire safety is becoming increasingly advanced, readily available, and affordable. At the forefront of this is Multi Sensor technology - whereby smoke alarm units are monitoring for more than one indication of fire - hence giving a quicker, more reliable, and faster reaction in the event of fire.
Read More