CO-9D

Digital Carbon Monoxide Alarm

7 Year Lifetime Battery

With a digital display, the latest sensing technology, and BSI Kitemark approvals, the FireAngel CO-9D Carbon Monoxide Alarm offers the highest level of CO detection for you and your family.

Kitemark

Third party tested and approved.

7 Year Warranty

For peace of mind.

GET IN TOUCH

CO-9D

Resources

To ensure you install the right alarm for your home, and one that's compliant with your local carbon monoxide regulations, review our manual and data sheet or get in touch with our customer service team.

Manual

Installation Support and Guidance

Datasheet

Specification Detail and Standards.

GET IN TOUCH

CO-9D

Set Up

The CO-9B alarm cannot be interlinked to other alarms in your home, but still offers the highest protection. Follow the installation guides to ensure your alarm is installed correctly and test weekly.

Install Guide

Where to install your alarm.

Testing Support

Testing and maintenance support.

GET IN TOUCH

Rapid CO Detection

Latest Sensing Technology

The electrochemical sensor in the FireAngel CO-9D Carbon Monoxide alarm provides instant alerts to dangerous levels of the CO. It's been rigorously tested and approved by BSI Kitemark to ensure the highest level of safety for your home.

Latest Sensing Technology

Battery Powered Protection

7 Year Battery Supplied

The unit comes with a sealed, tamper proof battery that will last the lifetime of the alarm. The sensor within the unit will deteriorate after 7 years, so to ensure you're protected we recommend you replace the unit after this time.

7 Year Battery Supplied

Protection for all

Futureproof Installations

The CO-9D alarm has been designed to conform to the EU standards - EN 50291-1: 2010 + A1:2012 and EN 50291-2: 2010. The alarm is also suitable for installation in caravans, motor caravans and boats, following advice from BS EN 50292-2013.

Futureproof Installations

Did you know?

Over 50% of fires start in the kitchen

Find out more

Protect the most dangerous room in your home - the kitchen - by installing a Heat Alarm. Our Kitchen Heat Alarms detect rapid spikes in temperature rather than smoke, which means they're perfect for high fume (e.g. smoke from cooking) and high humidity areas such as your garage and attic.

Find out more

COMPLETE THE RANGE . . .

FAQ's

A Carbon Monoxide (CO) alarm is the only way to alert residents to the presence of Carbon Monoxide within a property. A CO alarm via an audible alert

CO also known as ‘the silent killer’ is a gas which cannot be seen, tasted or smelt but can result in CO poisoning and illness or in some cases death. CO forms when the fuel in products, such as boilers, fires and ovens does not burn completely. Regular servicing of these products can reduce the risk of CO being present but it cannot completely remove the risk.

Our FireAngel Carbon Monoxide (CO) detectors are designed so that alarms can be wall-mounted or left freestanding within a property. Ideally, a CO alarm should be installed in every room with a fuel-burning appliance e.g gas hob, open fire, boiler. Additional alarms may be installed to provide adequate warning for occupants in other rooms, by placing alarms in rooms in which they spend considerable time whilst awake e.g living rooms, bedrooms, kitchens.

Boiler Room | Bedroom | Kitchen | Living Room

The common sources of Carbon Monoxide (CO) are cookers, fires, boilers, oil and gas boilers, portable generators, oil or solid fuel cookers, gas or paraffin heaters, barbecues (BBQs), clogged chimneys, wood or gas fireplaces, cigarette smoke or any fossil fuel-burning appliances.

Using a gas safe engineer to regularly service these items will help reduce the risk of CO in a home but it will not completely remove the risk. The only way to detect CO in your home is to install a Carbon Monoxide detector with an audible alarm. Gas safe engineers can be found via the ‘Gas Safe Register’ – this is an official list of businesses that are legally permitted to carry out gas work.