WCOB-SN-1 Front.png

Wi-Safe 2, 10 Year CO Alarm

WCOB-SN-1

5Yr Warranty.png5 Year Warranty
Battery.png10 Year Battery
Kitemark.png
BS Certfied
  • Features Wi-Safe 2 - One alarm goes off - they all go off
  • Features advanced electrochemical sensor designed to accurately measure levels of CO.
  • Suitable for wall mounting or freestanding offering greater flexibility in positioning

Positioning: Boiler Room | Kitchen| Laundry Room | Loft | Garage


coalarm.pngOur WCOB-SN-1, Wi-Safe 2 carbon monoxide alarm is a 10 year battery powered, sealed-for-life, wireless interlink CO alarm providing complete protection from CO poisoning in the home. The WCOB-SN-1 sends a wireless signal to all other Wi-Safe 2 products when it detects CO.

Key Features

Battery.png10 year sealed for life battery

Wi-Safe.pngWi-Safe 2 - wirelessly interlink multiple alarms one alarm goes off they all go off

Locate.pngLocate feature - silence all but initiating alarm in network

5Yr Warranty.png5 year warranty

Kitemark.pngCertified to BS EN14604:2005 and LPCB approved

W2-CO-10X Split.png
Wi-Safe-Header-V3.jpg
smoke-alarm-positioning.jpg

CO Alarm Positioning

Ideally a Carbon Monoxide Alarm should be installed in every room with a fuel burning appliance. Additional alarms may be installed to provide adequate warning for occupants in other rooms, by placing alarmrs in rooms in which they spend considerable time whilst awake.

 

Boiler Room | Bedroom | Kitchen | Living Room

33.jpg

CO Alarm Installation

To mount on a wall or ceiling:

1. Preparation

Unclip the base plate from the back of the alarm, Break out the tabs from the base plate. Use fixing slots on the base plate as a guide when marking the position of the drill holes. With an appropriatley sized drill, drill the holes and insert the plastic fixing anchors supplied (if needed),

2. Install the Base

Fit the base plate to the ceiling or wall using the screws provided.
Contact Us.jpg

We're Always Ready to Help!

Get Support