Fire Safety, Smart Home
Follow our step-by-step video or the guide below – https://vimeo.com/372892886/d5c3813324
Step 1 – Using a ballpoint pen push the ʻlearn buttonʼ twice in a quick succession but do not release the pen after the second push. Hold the pen in place until the red LED next to the learn button goes out. The red LED next to the learn button will then flash twice slowly, followed by three rapid flashes.
Step 2 -The LED process confirms the alarm has been un-learned successfully from the network.
Step 3 – Always ʻtestʼ to confirm the alarm has been un-learned by pressing its ʻtestʼ button. No other alarms will be triggered only the single alarm will sound. You can always repeat the ʻun-learnʼ process.