CO Advice, Fire Safety, Smart Home
Ian Ballinger, Director of Compliance at FireAngel, shares his advice on why housing providers should consider the benefits of going above and beyond the current regulations and recommendations by pairing an LD1 category specification with IoT and AI in order to protect tenants and simultaneously future-proof their housing portfolios.
There are now over 15 million ‘smart homes’ in the UK as individuals look for solutions designed to make life within their properties easier, safer and more efficient.
With regard to the social housing sector in particular, advancements in IoT technology are supporting housing providers and the UK’s Fire and Rescue Services in protecting individuals by specifying preventative, rather than reactive, fire safety measures that comply with an LD1 category specification.
While some housing providers may not initially aim to adhere to this specification because the current legal requirement is an LD3 category, the latest advancements in smoke alarm technology are offering greater flexibility regarding connected and cost-effective fire protection.
These technologies are not only compliant with an LD1 specification, which future-proofs the property against potential regulatory changes, but also offers the ability to be adapted and enhanced in future to meet the individual level of risk each tenant presents.
This can be achieved through the installation of a new generation of connected fire safety systems that feature both Smart RF and Predict® technology, providing effective remote monitoring of each property through a wireless network of alarms. The technology allows housing providers to easily monitor and manage the status of alarms in real time across their entire housing portfolio, highlighting any potential issues as and when they occur.
Historically, a collection of smoke, heat and carbon monoxide alarms will have been installed and tested upon initial installation, then only tested (at best) once a year. In a worst-case scenario, after the initial installation test, the alarms may never have been tested by tenants.
This is where housing providers can benefit from IoT and connected fire safety technologies using AI to bridge the gap in communication between a property and its tenant, as housing providers can benefit from silent network testing automatically conducted every 18 hours for each property. This helps to provide a clear due diligence trail of compliance (if and when required) and also confirms the status and performance of each alarm.
In theory, the remote monitoring capabilities that connected technologies offer can help support a significant reduction in overheads because the costs and requirements for physical property visits and subsequent missed appointments are eliminated. This new approach to fire safety delivers the highest standards of protection in the most cost-effective way, as providers can use Smart RF and Predict® technology to instantly view the performance of each alarm in real time to understand the trends and levels of risk each property presents.
The adaptable technology also enables individuals responsible for the management and maintenance of housing portfolios to use IoT technology to easily upgrade the fire protection systems installed throughout their entire housing stock in the future, subsequently reducing the challenges related to asset management and the associated costs.
This upgrade can be achieved by simply adding a Smart RF radio module into the alarm, allowing wireless interlinking of up to 50 alarms within one network. This creates a safety network with access to vital information including current status, alarm history, replacement dates and system health through the activation of a secure, cloud-based connected gateway.
By using AI through a connected fire safety system, which uses a gateway featuring a unique algorithm and patented Predict® technology, it can highlight trends and high-risk patterns of behaviour.
By being able to pinpoint tenants who have become vulnerable or high risk in a completely automated way, housing providers can use their resources to target and support those people most at need, both improving safety and ensuring they are using precious resources more efficiently.
The 2019 revisions to Part 6 of BS 5839 provide professionals, specifically landlords, with a best practice guide regarding the provision of fire safety for their new or materially-altered and existing properties. The update recommends upgrading from an LD3 specification (the previous minimum requirement) to an LD2 specification. The fire safety provision in sheltered housing flats has also been increased from LD2 to LD1, highlighting an area of potentially higher risk.
With regard to building regulations that cover new or materially-altered dwellings, it’s clear that there is a disparity between the regulations in England and Wales, which stipulate an LD3 minimum requirement, and in Scotland and Northern Ireland, which recommend a minimum requirement of LD2.
When compared with BS 5839-6, which advises a minimum requirement of LD2 in most rented single occupancy situations, it’s clear that the building regulations for England and Wales are not as closely aligned to those of its neighbours, resulting in an element of confusion over what level of protection is required.
The current minimum requirement for newly-built or materially-altered domestic dwellings in England and Wales is LD3, which requires the installation of a Grade D mains-powered smoke alarm with battery back-up in the circulation areas of each storey of a building, such as landings and hallways which form part of an escape route. Within the 2019 revisions to BS 5839-6, the recommendation of Grade D has been further defined into Grade D1 (sealed or rechargeable back-up) or Grade D2 (replaceable battery back-up).
For the private and rented sector in particular, a Grade D1 specification for maintenance purposes is seen as the most pragmatic solution, removing the obligation to replace batteries during the life span of the alarms. Protection can be taken one step further through an LD2 specification, which requires installation of a heat alarm in the kitchen in addition to a mains-powered smoke alarm (with battery back-up) in the most habitable or highest fire-risk room, such as a living room. In Scotland and Northern Ireland, along with other European countries, this level of specification is the current requirement under local building regulations.
While the UK government has recently announced that Approved Document B, Building Regulations for England and Wales, will be subject to a full review, housing providers shouldn’t wait for changes to the regulations to reinforce their duty of care. Housing providers can demonstrate best practice through the installation of alarms that meet an LD1 category and successfully futureproof their housing stock from any regulatory changes that may occur at a later date, while appropriately managing the level of risk each individual tenant presents.
An LD1 specification is designed to offer maximum protection through the installation of alarms in all areas of a property where a fire could potentially start. This includes alarms in all circulation spaces that form part of escape routes, in addition to smoke alarms in all high fire risk areas, including living rooms, bedrooms and dining areas. This also includes the installation of a heat alarm in a kitchen. To offer the highest levels of protection available, Thermoptek multi-sensing or optical alarms should be installed.
By following a best practice policy that adheres to an LD1 specification through the use of IoT and Smart RF fire safety technologies, housing providers can not only ensure compliance with current and future regulations, but successfully identify the level of risk or indeed an increased risk to their tenants and properties. Remote monitoring delivers many capabilities, allowing professionals within the housing sector to have a comprehensive understanding of which tenants are at a level of high or increased risk and require earlier intervention.
For more information on how we can tailor our range of connected fire and CO safety solutions to suit your housing portfolio, contact our expert team of specification managers today.
*Please note: British Standard 5839‑6 takes the form of guidance and recommendations. It should not be quoted as if it were a specification and particular care should be taken to ensure that claims of compliance are not misleading. Any user claiming compliance with this British Standard is expected to be able to justify any course of action that deviates from its recommendations. For more information or to read the standard in full, please visit the British Standards website.
