FireAngel FAQ's

Guidance for where to install your smoke, heat and CO alarms can be found below:

Where your alarm is installed can trigger nuisance alarms if not correctly placed, for example too close to doors or windows.

For more guidance as to where to install your smoke, heat or CO alarm please refer to your alarm’s manual or contact our friendly Customer Support team.

# Link to this question

Yes – you can hardwire interlink this alarm with other SW1 smoke alarms and HW1 heat alarms to offer protection across the home (12 devices in total).

# Link to this question

Yes – Heat Alarms won’t false alarm to dusty or humid rooms which makes them perfect for kitchens, utility rooms and garages.

# Link to this question

Yes – heat alarms and smoke alarms detect fire in very different ways. Smoke alarms, as the name suggests, alert you to fires by detecting smoke, so if there’s a slow smouldering fire (which usually doesn’t give off a lot of heat) it could be missed for some time if a you only have a heat alarm installed. We would recommend you review the regulations specific to your area, but as a guide we recommend that homes have a smoke alarm in the hallway, landing and in the room most used in the daytime, alongside a heat alarm in the kitchen.

# Link to this question

Yes – you can hardwire interlink this alarm with other HW1 Heat Alarms and SW1 Smoke Alarms to offer protection across the home (12 devices in total).

If you’re looking for alarms where you can combine mains powered and battery powered alarms into a single network then view our FireAngel Pro Connected alarm range.

# Link to this question