FP1820W2-R

Pro Connected Smart Carbon Monoxide Alarm

Battery Powered

With enhanced sensing, multiple installation styles and the option to enable alerts and test via your mobile, the Pro Connected Smart CO detector offers the highest level of protection for you and your family.

Optimised Sensing

Advanced Carbon Monoxide detection.

5 Year Warranty

Manufacturer's warranty for peace of mind.

BUY NOW

FP1820W2-R

Resources

To ensure you install the right alarm for your home, and one that's compliant with your local fire and carbon monoxide regulations, review our manual and data sheet or get in touch with our customer service team.

Manual

Installation Support and Guidance

Datasheet

Specification Detail and Standards.

BUY NOW

FP1820W2-R

Set-up

Connecting multiple Pro Connected alarms is simple - let Wes show you how! The system has been designed to be quick and simple and even allows you to mix battery and mains powered devices in to the same network.

Install Guide

Step by step installation support.

Build a Network

Interlink your alarms at the touch of a button.

BUY NOW

Third Party Certified

Kitemark Approved Technology

As well as our own rigorous testing processes the units are also assessed by the British Standards Institution (BSI) who have approved the unit as Kitemark certified, so you can rest assured knowing you're protected against CO.

Kitemark Approved Technology

Protection at your fingertips

Smart Testing and Alerts

By adding the Pro Connected Gateway and free FireAngel Connected App in to the network you can be instantly notified of any alerts and test the alarms via your mobile or smart device - and you can even enable Just Ask Alexa!

Smart Testing and Alerts

Designed For You

Detection Where You Need It

The unit can be either be wall mounted, using the two small screws provided, or left portable to be positioned where required. Designed to conform to EU standards the alarm is also suitable for installation in caravans, motor caravans and boats.

Detection Where You Need It

Did you know?

Over 50% of fires start in the kitchen

Shop Now

Protect the most dangerous room in your home - the kitchen - by installing a Heat Alarm. Our Kitchen Heat Alarms detect rapid spikes in temperature rather than smoke, which means they're perfect for high fume (e.g. smoke from cooking) and high humidity areas such as your garage and attic.

Shop Now

COMPLETE THE RANGE...

FAQ's

Carbon Monoxide is produced when fuels burn incompletely – this could be from a boiler, gas fire, oven, log burner or a blocked flue or chimney. It can also travel through walls from adjoining properties, so as well as having an alarm next to appliances in your property we would also advise you have one in living spaces and bedrooms.

To help prevent a Carbon Monoxide leak we advise getting your appliances regularly serviced by reputable engineers who are gas safety registered.

When alarms are interlinked they will all mirror the alert of the device which detects the danger or requires attention. When all of the alarms are alerting you can press the central test button on any of the alarms in the system to silence all alarms, except the alarm which has detected danger or needs further investigation.

In a network containing both smoke/kitchen heat alarms and carbon monoxide alarms, the alert style will tell you whether the danger is fire or carbon monoxide related. For smoke/fire detection the system will alarm with three beeps (beep – beep – beep) and if Carbon Monoxide is detected there will be four beeps (beep – beep – beep – beep).

If a Gateway is added to the network you can also check any push notifications or The App dashboard to see which device requires your attention.

When alarms are interlinked they are able to communicate and will alert at the same time if one of the alarms detects danger. In the case of wireless interlink, this communication is in the form of protected radio frequency, which means there’s no need to run cables between the alarms. The FireAngel Pro Connected alarms allow the network to be extended to include devices across your entire home. For example, a network of 7 x smoke alarms, 3 x heat alarms, 3 x carbon monoxide alarms and a Gateway will be completely secure and protect your whole home, and are backwards compatible with the FireAngel Wi-Safe2 range.

You can also add a Gateway into the network which will allow you to receive updates on the network when you’re away from the home. The Gateway will communicate with the FireAngel Connected App using your home’s internet connection, but if this fails or cuts out the alarms will still protect your home, but you won’t receive a push notification.

Follow the simple steps in our installation video…

 

Yes, all Wi-Safe2 devices are compatible with each other.

 

You can add new devices to an existing network at any time in the future.

 

Click here to view the FireAngel Pro Connected range.

You can add new Pro Connected alarms in to an existing system at any time in the future.

 

However if you’re looking to integrate the alarms in to a smart system manufactured by another company then this isn’t yet possible.

 

Please email connected.support@fireangeltech.com to discuss further.

Yes, the alarms will still function and interconnect without the FireAngel Pro Connected Gateway.

If you do not add the gateway, though, you will not be able to use the FireAngel Connected app.

Watch the video below for installation support: