FP1640W2-R

Pro Connected Smart Smoke Alarm

Mains Powered

With enhanced sensing, multiple installation styles and the option to enable alerts and test via your mobile, the Pro Connected Smart Smoke alarm offers the highest level of protection for you and your family.

Thermoptek

Multi-sensor, optimised fire detection.

5 Year Warranty

Manufacturer's warranty for peace of mind.

BUY NOW

FP1640W2-R

Resources

To ensure you install the right alarm for your home, and one that's compliant with your local fire and carbon monoxide regulations, review our manual and data sheet or get in touch with our customer service team.

Manual

Installation Support and Guidance.

Datasheet

Specification Detail and Standards.

BUY NOW

FP1640W2-R

Set-up

Connecting multiple Pro Connected alarms is simple - let Wes show you how! The system has been designed to be quick and simple and even allows you to mix battery and mains powered devices in to the same network.

Install Guide

Step by step installation support.

Build a Network

Interlink your alarms at the touch of a button.

BUY NOW
A Network of Protection Interlink Multiple Alarms

The Pro Connected alarms perform flawlessly as standalone products, but when wirelessly interconnected they'll raise the alarm in unison - if a fire starts in a remote area such as the garage, you’ll be alerted instantly across the home.

Interlink Multiple Alarms
Protection at your fingertips Smart Testing and Alerts

By adding the Pro Connected Gateway and free FireAngel Connected App in to the network you can be instantly notified of any alerts and test the alarms via your mobile or smart device - and you can even enable Just Ask Alexa!

Smart Testing and Alerts
Optimised Detection Multi-Sensing Technology

Thermoptek technology combines the very latest in optical sensing with thermal enhancement and when compared to single sensor alarms react to fire in under half of the time - meaning you and your family have vital extra time to react.

Multi-Sensing Technology

Did you know?

Over 50% of fires start in the kitchen Shop Now

Protect the most dangerous room in your home - the kitchen - by installing a Heat Alarm. Our Kitchen Heat Alarms detect rapid spikes in temperature rather than smoke, which means they're perfect for high fume (e.g. smoke from cooking) and high humidity areas such as your garage and attic.

Shop Now
COMPLETE THE RANGE...

FAQ's

The Pro Connected FP1640W2-R does not require an internet connection to alert you to fire. However if you have a Smart Gateway included in the network (which requires internet connection), and the internet connection is lost, the alarms will still perform flawlessly and will detect danger and alarm in the home, but you won’t receive a push notification to your devices.

In order to identify how many alarms to install you need to research the guidelines for fire detection that apply in your local area, using regulations such as Building Regulations or the guidance in BS5839-6, and consider your property type; whether that be private owned, rented, new build, renovated etc. The advice below is purely provided for ‘best practice’ and should not be used independently.

If you live in Scotland find out more on our blog post here.

To offer high protection FireAngel advise a smoke alarm within the circulation area of each floor of the property (hallway & landing), as well as within the main habitable areas such as bedrooms and living room – where we usually have more electricals such as extension leads and chargers plugged in.

We recommend you install Smoke Alarms alongside Carbon Monoxide (CO) Alarms and Kitchen Heat Alarms in your home for complete protection.

When alarms are interlinked they are able to communicate and will alert at the same time if one of the alarms detects danger. In the case of wireless interlink, this communication is in the form of protected radio frequency, which means there’s no need to run cables between the alarms. The FireAngel Pro Connected alarms allow the network to be extended to include devices across your entire home. For example, a network of 7 x smoke alarms, 3 x heat alarms, 3 x carbon monoxide alarms and a Gateway will be completely secure and protect your whole home, and are backwards compatible with the FireAngel Wi-Safe2 range.

You can also add a Gateway into the network which will allow you to receive updates on the network when you’re away from the home. The Gateway will communicate with the FireAngel Connected App using your home’s internet connection, but if this fails or cuts out the alarms will still protect your home, but you won’t receive a push notification.

Follow the simple steps in our installation video…

 

Yes, all Wi-Safe2 devices are compatible with each other.

 

You can add new devices to an existing network at any time in the future.

 

Click here to view the FireAngel Pro Connected range.

You can add new Pro Connected alarms in to an existing system at any time in the future.

 

However if you’re looking to integrate the alarms in to a smart system manufactured by another company then this isn’t yet possible.

 

Please email connected.support@fireangeltech.com to discuss further.

Yes, the alarms will still function and interconnect without the FireAngel Pro Connected Gateway.

If you do not add the gateway, though, you will not be able to use the FireAngel Connected app.

Watch the video below for installation support:

Guidance for where to install your smoke, heat and CO alarms can be found below:

Why is my FireAngel smoke alarm beeping?

Where your alarm is installed can trigger nuisance alarms if not correctly placed, for example too close to doors or windows.

Why is my FireAngel smoke alarm beeping?

For more guidance as to where to install your smoke, heat or CO alarm please refer to your alarm’s manual or contact our friendly Customer Support team.