Pro Connected Kitchen Heat Alarm, Mains Powered

When alarms are interlinked they are able to communicate and will alert at the same time if one of the alarms detects danger. In the case of wireless interlink, this communication is in the form of protected radio frequency, which means there’s no need to run cables between the alarms. The FireAngel Pro Connected alarms allow the network to be extended to include devices across your entire home. For example, a network of 7 x smoke alarms, 3 x heat alarms, 3 x carbon monoxide alarms and a Gateway will be completely secure and protect your whole home, and are backwards compatible with the FireAngel Wi‑Safe2 range.

You can also add a Gateway into the network which will allow you to receive updates on the network when you’re away from the home. The Gateway will communicate with the FireAngel Connected App using your home’s internet connection, but if this fails or cuts out the alarms will still protect your home, but you won’t receive a push notification.

The Pro Connected FP1740W2-R does not require an internet connection to alert you to fire. However if you have a Smart Gateway included in the network (which requires internet connection), and the internet connection is lost, the alarms will still perform flawlessly and will detect danger and alarm in the home, but you won’t receive a push notification to your devices.

In the UK, landlords must install at least one smoke alarm on every storey of a rental property where there is a room used as living accommodation. In addition, a carbon monoxide alarm must be fitted in any room with a solid fuel-burning appliance.

Unlike smoke alarms, heat alarms have been specifically designed for areas with fumes and high humidity e.g. kitchens where cooking fumes are present and attics or garages where there is lots of dust and usually high humidity. Nearly 50% of fires start in kitchens in domestic properties – installing a heat alarm in this room will mean you’re rapidly alerted to danger and reduce the number of nuisance alarms.

Find out the difference between smoke alarms and heat alarms.

When alarms are interlinked they will all mirror the alert of the device which detects the danger or requires attention. When all of the alarms are alerting you can press the central test button on any of the alarms in the system to silence all alarms, except the alarm which has detected danger or needs further investigation.
In a network containing both smoke/kitchen heat alarms and carbon monoxide alarms, the alert style will tell you whether the danger is fire or carbon monoxide related. For smoke/fire detection the system will alarm with three beeps (beep – beep – beep) and if Carbon Monoxide is detected there will be four beeps (beep – beep – beep – beep).
If a Gateway is added to the network you can also check any push notifications or The App dashboard to see which device requires your attention.

Yes, FireAngel’s Specification range supports Smart RF technology, enabling you to create wireless networks with smoke alarms, heat alarms, and carbon monoxide alarms. Alarms in this range include:
FS2126-T (Battery Multi-Sensor Smoke Alarm)
FS1226-T (Battery Heat Alarm)
FS1326-T (Battery CO Alarm)
This feature allows for comprehensive monitoring and easy management of your fire and CO safety system.

No, all FireAngel ProConnected Products are not compatible with DrayTek routers. For more information please refer to the data sheet or get in contact.